• Begin by washing the entire vehicle with a high-quality car wash shampoo to remove loose dirt and debris. Rinse thoroughly.

• Inspect the paint surface to identify areas with embedded contaminants. These may appear as tiny specks, spots, or rough patches on the paint.

• Choose a suitable clay bar or clay mitt and lubricant. Ensure that the surface and the clay bar are well-lubricated to prevent scratching.
• Gently glide the clay bar or mitt across the paint surface in straight lines, applying light pressure. The clay will pick up and trap contaminants as it glides.

• Periodically inspect the clay bar's surface. As it becomes soiled with contaminants, fold and knead it to expose a clean section.

• Repeat the clay bar process for the entire vehicle, including the roof, hood, doors, and trunk.
• Pay extra attention to areas with heavy contamination, such as the lower panels and wheel arches.

• After decontamination, thoroughly rinse the vehicle to remove any remaining clay lubricant and released contaminants.
• Inspect the paint surface to ensure it feels smooth and free of embedded particles.

• Use a clean microfiber towel to gently dry the vehicle, ensuring that no contaminants are left on the surface.

• In some cases, paint correction may be necessary to address any surface imperfections or swirl marks that were revealed during the decontamination process.

• Apply a suitable paint sealant or wax to protect the paint and enhance its shine.

Assessment:

• Begin by inspecting the vehicle's paintwork to identify imperfections such as swirl marks, scratches, oxidation, and other surface defects.

• Apply a cutting compound or polish to the paint surface using a rotary or dual-action polisher. This compound contains abrasives that are designed to remove deep imperfections.

Polishing:

• Use the polisher to work the compound into the paint surface, moving it in overlapping passes. Apply moderate pressure and keep the pad flat against the paint. Work on a small section at a time.

• Periodically stop to check your progress and ensure that the imperfections are being gradually removed. Continue until the desired level of correction is achieved.

Wipe Down:

• After polishing a section, wipe it down with a clean microfiber towel to remove excess compound and inspect for any remaining imperfections.

Assessment:

• Reassess the paint surface to determine if any medium-level imperfections or haze remain after the compound polishing.

• Apply a medium-grade polish to the paint surface using a polishing pad. This polish is less abrasive than the compound and is used to refine the finish.

Polishing:

• Use the polisher to work the medium-grade polish into the paint surface, just as you did with the compound. Again, work on a small section at a time.

• Stop periodically to check your progress, ensuring that any remaining imperfections are being removed and the paint is becoming smoother and shinier.

Wipe Down:

• After polishing a section, wipe it down with a clean microfiber towel to remove excess polish and inspect for any remaining imperfections.

Assessment:

• Examine the paint surface to verify if any fine imperfections or hazing still exists.

• Apply a finishing polish to the paint surface using a finishing pad. This polish is very fine and is used to create a high-gloss finish.

Polishing:

• Use the polisher to work the finishing polish into the paint surface, following the same technique as in previous steps.

• As before, periodically stop to check your progress, ensuring that any remaining imperfections are being minimized and the paint is achieving a deep shine.

Final Wipe Down:

• After completing the finishing polish on each section, wipe it down with a clean microfiber towel to remove any residue and ensure a brilliant finish.

• Remove any personal items and clutter from the interior of the vehicle to access all areas that need cleaning.
• Vacuum the interior thoroughly to remove loose dirt, debris, and crumbs from carpets, seats, and floor mats.

• Use a high-quality steam cleaner equipped with various attachments and nozzles for different surfaces.
• Steam clean the following areas:
• Carpet and Upholstery, Dashboard and Console, Vents and Crevices, Door Panels and Armrests, Headliner, Leather Surfaces, Windows and Mirrors

• Address any stubborn stains or spots by applying steam directly to the affected area and gently blotting or agitating with a soft brush or microfiber cloth.

• Steam cleaning helps to remove and neutralize odors. For persistent odors, an upholstery or fabric-specific deodorizer may be used after steam cleaning.

• Allow the interior to air dry naturally. Open windows or doors to facilitate the drying process and prevent the buildup of moisture.

• Inspect the interior to ensure all areas have been thoroughly cleaned and that no spots or stains remain.

• Use a clean microfiber towel to gently dry the vehicle, ensuring that no contaminants are left on the surface.

• In some cases, paint correction may be necessary to address any surface imperfections or swirl marks that were revealed during the decontamination process.

• Apply a suitable paint sealant or wax to protect the paint and enhance its shine.

Start by thoroughly cleaning the trim surfaces. Use a mild detergent or an automotive trim cleaner to remove dirt, grime, and contaminants. Scrub the trim gently with a soft brush or a dedicated trim cleaning brush.

Examine the trim closely to identify any areas with discoloration, fading, or damage. Note areas that require additional attention.

If you are performing exterior trim restoration, protect surrounding areas like the paintwork with masking tape and plastic sheeting to prevent accidental overspray or staining.

For severely faded or damaged trim, light sanding may be required to remove the top layer of oxidized or discolored material. Use a fine-grit sandpaper (e.g., 2000 grit) and wet sanding techniques to avoid scratches.

Choose an appropriate trim restoration product based on the trim's material (plastic, rubber, or vinyl). These products often include trim restoration creams, gels, or dyes.

Apply the trim restoration product evenly to the trim surface using a clean applicator pad, sponge, or cloth. Follow the product manufacturer's instructions for application.

After the product has been applied, use a clean cloth or a polishing pad to buff the trim surface to a uniform shine. This step helps evenly distribute the product and remove excess residue.

In some cases, multiple applications may be necessary to achieve the desired level of restoration, especially for heavily faded or damaged trim.

Carefully inspect the trim to ensure it has been evenly restored and that no streaks or residue remain.

Consider applying a trim protectant or UV-resistant coating to help prevent future fading and damage. Regularly maintain the trim with appropriate products to prolong its restored appearance.